Checklist: Spring Maintenance

 
 
 
 
 
 Roof - Inspect roof surface flashing, eaves, and soffits.

 Gutters and downspouts - Clean out; inspect and repair weaknesses; check for proper drainage.

 Siding - Inspect and clean siding.

 Exterior caulking - Inspect caulking and replace if deteriorating.

 Window sills, door sills, and thresholds - Fill cracks, caulk edges, repaint; replace if necessary.

 Window and door screens - Clean screening and repair or replace; tighten or repair any loose or damaged frames and repaint; replace broken, worn, or missing hardware; tighten and lubricate door hinges and closers. 

 Drain waste and vent system - Flush out system.

 Hot-water heating system - Lubricate circulating pump and motor.

 Evaporative air conditioner - Clean unit; check belt tension and adjust; replace cracked or worn belt.

 Heat pump - Lubricate blower motor.

 Foundation - Check foundation walls, floors, concrete, and masonry for cracking, heaving, or deterioration.

 Siding and trim - Check all wood surfaces for weathering and paint failure.

 Deck and porches - Check all decks, patios, porches, stairs, and railings for loose members and deterioration. 

 Landscape - Cut back and trim all vegetation and overgrown bushes from structures.

 Flashing - Check flashings around all surface projections and sidewalls.

 Antenna - Check antenna and satellite dish supports.

 Sprinkler - Check lawn sprinkler system for leaky valves and exposed lines.

 Water well - Consider having well water tested for safety.